Found 100 product(s) for All (1-100 of 100)
AEM Short Ram Intake
|
AEM Short Ram Air Intake System is the world's most advanced short pipe air induction system. Although the AEM Cold Air Induction system provides more punch, the Short Ram intake system out runs and out guns any and all short pipe systems.
|
PRICE: $184.99
 
|
HKS Super Mega Flow Kit
|
HKS Super Mega Flow Kit produces smoother and more even airflow with increased velocity for optimal air/fuel atomization, which result in increased throttle response, horsepower, torque and fuel efficiency.
|
PRICE: $159.99
|
Injen Cold Air Extension
|
Injen EIS Cold Air Extension is a cold air intake extension that adapts on to several of the Injen IS series intake systems. It was developed for the enthusiast who wants the power of a cold air.
|
PRICE: $159.99
|
Injen Short Ram Intake Systems
|
Injen Short Ram Intake Systems Series is a traditional, underhood intake system that is placed in the stock location of the factory air-box system.
|
PRICE: $224.99
|
K&N Fuel Injection Performance Kits (FIPK)
|
K&N Fuel Injection Performance Kits (FIPK) replace your restrictive factory air filter for a higher flowing K&N cone filter. The kits include a nylon structure intake pipe to dissipate heat for cooler inlet temperatures. Each kit is custom tailored for a precise fit.
|
PRICE: $174.99
|
Blitz Blow Off Valve
|
Blitz Blow Off Valve is essential to all turbocharged vehicles. The purpose of the Blitz Blow Off Valve DD is to relieve compressor surge without reducing compressor speed. It controls boost pressure that is built up by the turbo and vents it into the atmosphere when the car is not under load (in between shifts).
|
PRICE: $204.99
|
Godzilla Blow Off Valve
|
Godzilla Blow Off Valve A totally unique design! The "Godzilla" bypass valve assembly offers the ultimate in surge protection and cosmetic appeal.
|
PRICE: $364.99
|
Greddy Blow Off Valve
|
Greddy Blow Off Valve are easily adjustable to prevent both premature boost leakage and compressor surge. Each is made of durable cast and billet aluminum frame and the valve to diaphragm ratio provides performance that cheap piston types cannot offer.
|
PRICE: $214.99
|
HKS Super Sequential Blow-Off Valve (SSQV)
|
HKS Super Sequential Blow-Off Valve (SSQV) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operation range from low boost to high boost.
|
PRICE: $224.99
|
Raptor Blow Off Vlave
|
Raptor Blow Off Valve sets the standard for all other blow off valves! Best unit on the market today. Incredible sound! Can be set up to blow off or bypass boost (this means it can be used on cars with MAF sensors).
|
PRICE: $254.99
|
Synapse Synchronic Blow Off Valve
|
The first blow off valve to revolutionize the industry is finally here. It utilizes a pull-type piston actuated design instead of typical diaphragm actuated designs for unparalleled response and eliminates compressor surge.
|
PRICE: $214.99
|
Tial 50mm Blow off Valve
|
Tial 50mm Blow off Valve are desing for turbo-charge and super charge applications.
|
PRICE: $224.99
|
TurboXS Blow Off Valve Type H
|
TurboXS Blow Off Valve Type-H-RFL: A new larger billet aluminum body and a beefier piston ensures the valve remains smooth under the most demanding circumstances.
|
PRICE: $169.99
|
TurboXS Blow Off Valve Type H
|
TurboXS Blow Off Valve Type H: The BOV Type H provides greater venting flow than the Type S and is designed for turbo charged engines running 10 to 25 psi boost. Each valve is individually tested to hold 30 lbs. of boost.
|
PRICE: $159.99
|
TurboXS Blow Off Valve Type S
|
The BOV Type S is recommended for small to medium sized turbo charged engines running up to 15 psi boost. Each valve is individually tested to hold 30 lbs. of boost. Type S valve vents to atmosphere at up to 106dB at 10 psi.
|
PRICE: $114.99
|
Turbosmart BOV TYPE 1
|
BOV Type 1 is best suited to engines up to 1.5L in capacity, producing standard or mildly increased boost. Compact in size, it’s ideal for small, space-restricted engine bays. Great entry-level product.
|
PRICE: $124.99
|
Turbosmart Megasonic
|
The loudest BOV in the Turbosmart range. If extreme performance and spectacular sound are your priorities – the Megasonic is the BOV for you. Aimed at the serious racer, it’s also ideally suited for show cars that want to stand out from the crowd.
|
PRICE: $254.99
|
Turbosmart Race Port
|
Race Port features a massive 52mm inlet, the Race Port is Turbosmart’s largest and highest-flowing blow-off valve. Flowing up to 100% more than its nearest competitor, the Race Port is ideal for high horsepower, turbo or supercharged racing applications.
|
PRICE: $289.99
|
Turbosmart Vee-Port
|
Vee-Port features a unique, variable exhaust port system, providing superior venting of excess pressure. Simple and effective. Ideal choice for drifting or circuit enthusiasts.
|
PRICE: $174.99
|
Chassis Engineering Door Hinge Kit (TWO PIECE LIGHT WEIGHT 'PRO' HINGE KIT - MOLY)
|
Our one piece steel and two piece moly pro-tube door hinge kits are substantially lighter than factory hinges and allow for quick removal of fiberglass doors
|
PRICE: $129.95
|
Chassis Engineering Door Hinge Kit Sportsman
|
|
Our one piece steel and two piece moly pro-tube door hinge kits are substantially lighter than factory hinges and allow for quick removal of fiberglass doors.
|
PRICE: $79.95
|
Chassis Engineering Door Limit Straps
|
These simple devices limit how far your fiberglass door can swing open to prevent expensive damage from over-centering. Adjustable for length and sold in pairs.
|
PRICE: $52.99
|
Chassis Engineering Door Striker and Mount Kit
|
These small stainless door strikers are ideal for race cars and easy to install in any glass or steel car. They include mounting hardware and instructions.
|
PRICE: $64.95
|
Chassis Engineering Front End Mount
|
Designed to mount one-piece front ends on either factory or tube chassis. These kits contain the necessary tubing and hardware to mount any fiberglass front end on any chassis.
|
PRICE: $79.95
|
Chassis Engineering Front End Mount CHROME MOLY
|
|
Designed to mount one-piece front ends on either factory or tube chassis. These kits contain the necessary tubing and hardware to mount any fiberglass front end on any chassis.
|
PRICE: $104.95
|
Chassis Engineering Front End Mounting Kit
|
Contains all the necessary 3/8” x .058” DOM tubing, panel fasteners tabs, buttons, springs and a bending fixture to fabricate bracketry required to mount a fiberglass or steel front end.
|
PRICE: $94.95
|
Chassis Engineering Glass In Body Mount Kit
|
This kit includes enough small diameter tubing, 8 glass-in mounting plates and weld tabs to properly.
|
PRICE: $79.95
|
The 41 Body Kit - Carbon Fiber
|
Special Features: Aerodynamic P/M Design, Chopped Top, Raised Rear Wheel Openings, One Piece Front End, Built in P/M Wing
|
PRICE: $8,500.00
|
The 41 Body Kit-Fiberglass
|
|
Special Features: Aerodynamic P/M Design, Chopped Top, Raised Rear Wheel Openings, One Piece Front End, Built in P/M Wing
|
PRICE: $4,500.00
|
The 53 Body Kit - Carbon Fiber
|
Special Features: Aerodynamic P/M Design, F/C Style Rolled Wheel Openings, One Piece Front End, Built in P/M Wing.
|
PRICE: $8,500.00
|
The 53 Body Kit - Fiberglass
|
|
Special Features: Aerodynamic P/M Design, F/C Style Rolled Wheel Openings, One Piece Front End, Built in P/M Wing.
|
PRICE: $4,500.00
|
The 55 Body Kit - Fiberglass
|
Special Features: Aerodynamic Design, 7/8 Scale, Reduced Size Hood and Deck Lid for Easy Access, Flushed Window Lips, Extended Front Overhang, Classic 55 Styling.
|
PRICE: $4,500.00
|
The 55 Body Kit-Carbo Fiber
|
|
Special Features: Aerodynamic Design, 7/8 Scale, Reduced Size Hood and Deck Lid for Easy Access, Flushed Window Lips, Extended Front Overhang, Classic 55 Styling.
|
PRICE: $8,500.00
|
The 57 Body Kit - Fiberglass
|
Special Features: 7/8 Scale, Removable Hood and Deck Lid, Firewall Attachment Lips, Chopped Top, Flushed Window Lips
|
PRICE: $4,500.00
|
The 57 P/M Body Kit - Carbon Fiber
|
Special Features: 2 Front End Styles - P/M Legal & T/S Legal, Aerodynamic P/M Design, Classic 57 Styling, Chopped Top, Carbon P/M Wing Pieces Included, Removable Hood, Flushed Window Lips.
|
PRICE: $8,500.00
|
The 57 P/M Body Kit - Fiberglass
|
|
Special Features: 2 Front End Styles - P/M Legal & T/S Legal, Aerodynamic P/M Design, Classic 57 Styling, Chopped Top, Aluminum P/M Wing Pieces Included, Removable Hood, Flushed Window Lips.
|
PRICE: $4,500.00
|
The 67 Body Kit - Carbon Fiber
|
Special Features: 7/8 Scale, Removable Hood and Deck Lid, Firewall Attachment Lips, Chopped Top, Flushed Window Lips, Classic 67 Styling
|
PRICE: $8,500.00
|
The 67 Body Kit - Fiberglass
|
|
Special Features: 7/8 Scale, Removable Hood and Deck Lid, Firewall Attachment Lips, Chopped Top, Flushed Window Lips, Classic 67 Styling
|
PRICE: $4,500.00
|
The 68 Body Kit (Narrow) Carbon Fiber
|
Special Features: New One Piece Aero Front End, Chopped Top, P/M Wing Built In, All Body Lines Flushed and Smoothed for Improved Aerodynamics
|
PRICE: $8,500.00
|
The 68 Body Kit (Narrow) Fiberglass
|
|
Special Features: New One Piece Aero Front End, Chopped Top, P/M Wing Built In, All Body Lines Flushed and Smoothed for Improved Aerodynamics
|
PRICE: $4,500.00
|
The 68 Body Kit - Carbon Fiber
|
Special Features: New One Piece Aero Front End, Chopped Top, P/M Wing Built In, All Body Lines Flushed and Smoothed for Improved Aerodynamics, Flushed Window Lips, Un-matched Styling, Narrow Design (Same Frontal Area as 1963 Corvette)
|
PRICE: $8,500.00
|
The 68 Body Kit - Fiberglass
|
|
Special Features: New One Piece Aero Front End, Chopped Top, P/M Wing Built In, All Body Lines Flushed and Smoothed for Improved Aerodynamics
|
PRICE: $4,500.00
|
The 70 Body Kit - Carbon Fiber
|
The 70 Body Kit - Carbon Fiber
|
PRICE: $8,500.00
|
The 70 Body Kit - Fiberglass
|
|
The 70 Body Kit - Fiberglass
|
PRICE: $4,500.00
|
Tim Mcamis Performance Parts Body Mounting Kit
|
We've assembled a kit to simplify mounting a fiberglass body to the chassis. This kit comes with plenty of tubing and specially designed plates that will bond very tightly to the body.
|
PRICE: $99.95
|
Tim Mcamis Performance Parts Door Hinge Kit (Bent)
|
This kit is designed for all cars that need to swing the doors outside the body perimeter (Like 63 and 53 Corvette or 37 Chevy).
|
PRICE: $215.00
|
Tim Mcamis Performance Parts Door Hinge Kits(Standard)
|
This kit makes hinging the doors a breeze. Complete with all hardware and detailed instructions. Some welding and fabricating required.
|
PRICE: $149.50
|
Tim Mcamis Performance Parts Door Latch Kit
|
These door latches fit virtually any doors due to their narrow width. With their secondary latch system they have all the same features as the factory latches.
|
PRICE: $49.95
|
Tim Mcamis Performance Parts Door Stop Strap Kit
|
Use this adjustable door strap kit to keep your newly hinged doors from opening too far.
|
PRICE: $45.00
|
Tim Mcamis Performance Parts Exterior Door Handle Kit
|
This kit works great on those cars that don't have provisions for a factory type handle. It is designed to attach to the door latch and come straight up through the body. Pushing down on the rod activates it.
|
PRICE: $37.50
|
Tim Mcamis Performance Parts Front End Mount Kit Rear
|
This kit mounts the rear of the front end. The mounts attach to the rocker panel, strut tube and the bottom edge of the windshield.
|
PRICE: $74.95
|
Tim Mcamis Performance Parts Front End Mounting Kit
|
Kit includes all the tubing and plates to successfully fabricate a slide on mount for your front end. Some fabrication and welding required.
|
PRICE: $89.95
|
Tim Mcamis Performance Parts Inner Door Handle Kit
|
Designed to keep the handle up and out of the way on the inner door. This kit is compatible with our door latch kit. Complete with instructions
|
PRICE: $79.95
|
Tim Mcamis Performance Parts Upper Door Latch Kit
|
The aerodynamics of some vehicles requires that the top of the door window be secured. This kit is an easy solution to this problem.
|
PRICE: $195.00
|
AEM-Tru-Boost Gauge-Type Controller
|
AEM’s TRU-BOOST Gauge-Type Controller is an electronic boost controller that combines the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface.There is no external interface required for set up, and it is fully functional right out of the box. There are no gimmicks or special software programs included. If you want more boost press the button on the right of the gauge face, and if you want less boost press the button on the left of the gauge face.
|
PRICE: $299.99
|
AMS-1000
|
The AMS-1000 is the secret the top teams are using and now it is available to you!
NLR is the leader in forced induction technology. The latest development is this controller. This controller does what others wish they could do.
|
PRICE: $899.99
|
Blitz Dual Solenoid Boost Controllers
|
Blitz Dual Solenoid Boost Controller has four programmable boost settings or various levels of boost. This unit features a built-in boost gauge, peak boost display, four different boost settings, boost warning, scramble boost, and a boost limiter safety feature to prevent over-boosting.
|
PRICE: $489.99
|
Blitz Dual Solenoid Boost Controllers
|
|
Blitz Dual Solenoid Boost Controller has four programmable boost settings or various levels of boost. This unit features a built-in boost gauge, peak boost display, four different boost settings, boost warning, scramble boost, and a boost limiter safety feature to prevent over-boosting.
|
PRICE: $335.99
|
Blitz Sequential Boost Controller i-D (SBC i-D)
|
Blitz Sequential Boost Controller i-D (SBC i-D) represents the cutting edge in boost controller technology. The SBC i-D features the same dual solenoid design as the DSBC for maximum boost response and the capability to hold up to 36.75psi (2.5 bar). The SBC i-D is 1/2 din size and it is compatible with internal actuators and external wastegates.
|
PRICE: $559.99
|
Greddy Profec B Spec II Boost Controller
|
Greddy Profec B Spec II's basic function to increase boost is as easy as the original, with an added built in boost pressure display and optional features like real-time, peak or last boost display (in either KPA or PSI).
|
PRICE: $354.99
|
Greddy Profec E-01 Boost Controller
|
Greddy Profec E-01 is designed as a combination boost-controller, data display/logger and E-Manage Programmer. The data display can view 3 different data channels simultaneously such as boost, RPM or any other channel inputted by the E-Manage.
|
PRICE: $559.99
|
HKS EVC Boost Controller
|
HKS EVC Boost Controller is the first boost controller to feature integrated CPUs in each component (Display Unit, Control Module, and Stepping Motor) for more precise control, quicker response and improved boost pressure stability.
|
PRICE: $559.99
|
PCS Boost Control Kit with Pressure Sensor
|
The Boost Control Kit enables multistage boost control on the D200 and provides hardware for the installation.
|
PRICE: $374.99
|
Powertrain Control Solutions (PCS) Boost Controller
|
PCS offer a boost controller that is capable of adjusting the boost settings up to 16 stages.It could also work together with the D200 dashlog
|
PRICE: $99.99
|
Turbo XS High Performance Dual Stage Boost Controller
|
Turbo XS Dual Stage High Performanc Dual Stage Boost Controller provides the ultimate in dual stage boost control.Two preset boost levels allow you to switch from "street" to "race"
|
PRICE: $244.99
|
Turbo XS Quad Stage Boost Controller
|
Turbo XS Quad Stage Boost Controller provides the ultimate in boost related FWD traction control.
|
PRICE: $369.99
|
TurboXS DTEC Boost Controller Pro (DTEC-BC-PRO)
|
The DTEC-BC-PRO is quite simply THE BEST boost controller ever made. It turns your Gameboy Advance SP into a powerful Electronic Boost Controller cabable of controlling boost pressures in excess of 60psi.
|
PRICE: $499.99
|
TurboXS Dual Stage Boost Controller
|
TurboXS Dual Stage Boost Controller allows you to switch between two preset boost levels with the flip of a switch from inside the car. Got a high horsepower Front Wheel Drive turbocharged car
|
PRICE: $234.99
|
TurboXS Single Stage Boost Controllers
|
TurboXS Single Stage Boost Controllers are the most effective way to increase boost pressure to your turbocharged vehicle.
|
PRICE: $79.99
|
Turbonetics Billet Variable Boost Controller Kit
|
This manual boost controller is CNC manufactured out of one piece billet 6061 aluminum. The design incorporates both a ball-and-spring as well as bleed for full control over tuning boost curve on either internal or external wastegates, single and dual port actuators.
|
PRICE: $154.99
|
Turbonetics Variable Boost Control Kit
|
Change your boost level from the cockpit of your car with the Turbonetics “VBC” kit. The “VBC” kit can adjust boost pressure on any external wastegate or factory dual port actuator.
|
PRICE: $74.99
|
Turbosmart Boost Tee
|
Smaller and lighter than other Manual Boost Controllers on the market. Set your boost and forget it. Boost adjustable from under the hood with an accurate, proven Detent System. Easy to install and adjust.
Supplied with a billet mounting bracket.
|
PRICE: $84.99
|
Turbosmart Dual Stage
|
Fast boost response with two adjustable boost levels. Toggle between high and low boost on the fly. Ideal replacement for factory boost controllers.
|
PRICE: $184.99
|
Turbosmart In-Cabin
|
Control the boost from the driver’s seat. Ideal for the active enthusiast who wants boost adjustment on the run. Detent System makes adjusting a breeze. Gated System brings boost on faster. Supplied with a billet mounting bracket, hose and all fitting hardware.
|
PRICE: $129.99
|
Turbosmart Single Stage
|
Fast boost response with a single adjustable boost level. Switch between standard and high boost on the fly. Ideal for turbo cars without factory boost controllers.
|
PRICE: $159.99
|
Turbosmart e-Boost 40psi
|
More than just a boost controller, e-Boost2 puts you in total control of your turbocharger. With a host of new features and state-of-the-art software, e-Boost2 is the one accessory all owners of turbocharged cars should have!
|
PRICE: $454.99
|
Turbosmart e-Boost 60psi
|
More than just a boost controller, e-Boost2 puts you in total control of your turbocharger. With a host of new features and state-of-the-art software, e-Boost2 is the one accessory all owners of turbocharged cars should have!
|
PRICE: $564.99
|
Borg Warner Stg 3 .63 A/R T/3
|
Borg Warner Stage 3 Oil-cooled bearing system * Free floating non-wastegated turbine housing * Extremely efficient turbo.Horsepower 250-350.
|
PRICE: $624.99
|
Borg Warner S256 V-Band .58 A/R T/4
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S258 V-Band .58 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S258 V-Band .70 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S258 V-Band .84 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S258 V-Band 1.00 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S258 V-Band 1.15 A/R T/4
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S258 V-Band 1.32 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S261 V-Band .58 A/R T/4
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S261 V-Band .70 A/R T/4
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S261 V-Band .84 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S261 V-Band 1.00 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S261 V-Band 1.15 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S261 V-Band 1.32 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S264 V-Band .58 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S264 V-Band .70 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S264 V-Band .84 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S264 V-Band 1.00 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S264 V-Band 1.15 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S264 V-Band 1.32 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S267 V-Band .58 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S267 V-Band .70 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
Borg Warner S267 V-Band .84 A/R T/4
|
|
With a maximum mass flow rate of 55 lbs/min, the S200 is a high-boost and efficient turbo that can flow enough air to support 650 wheel horsepower, yet still spools as fast as most similarly-sized ball-bearing units.
|
PRICE: $724.99
|
