|
Service
Policies
About Us
Lost your password?
Self Sticking Insul Hangers
SKU:
Self Sticking Insul Hangers have 12ga. (.106"/2.7mm) diameter mild steel spindles with a corrosion resistant coating. The base plate is 2" (51mm) square and is made of galvanized steel with a pre-applied, pressure-sensitive adhesive protected by a release paper.
4 Easy Steps to Self Sticking Insul Hangers
1 - Clean Surface
Make sure the work area is clean, dry, non-porous and free of all oil, film, rust, etc.to assure proper adhesion.
2-Peel Off Backing
Simply remove the release paper from the self-adhering base plate.
3-Press in Place
Stick the hanger on to the properly prepared suitable flat surface, using a firm direct pressure.
4-Install Insulation
No waiting required. Secure insulation immediately after properly applying the hanger. Recommended load per anchor: 3lbs
Self Sticking Insul Hangers need to be used in conjunction with Self Locking Washers (sold seperately on site)
| PRICE: |
$133.50
$133.50 1-5/8"
$138.50 2-1/2"
|
| UOM: |
Per Box (1,000 pins) |
| Availability: |
Stock Item |
| 
