Canoga Concrete and Plaster/Mortar Mixers Features:
1) Double action dump/tub locking handle eliminates the need to pull two handles at the same time. Other brands of plaster/mortar mixers have a locking handle separate form the dumping handle which makes it impossible to position your body correctly while pulling the dumping handle to dump the mix out of the tub. With a Canoga double action handle there is less chance of injury to your back.
2) Sled type steel foot plate at the bottom of the front stand carries the weight of the mixer when it is not being towed and provides better support on soft ground. The front and rear edges of the plate are turned up so when towing a mixer, and you enter a driveway approach, if the foot plate happens to drag on the pavement, the sled type foot plate will not dig into the pavement as readily as a flat plate (less chance of damaging the pavement or the mixer). When relocating the mixer on the job site, it makes it easier to push or move the mixer a few inches or feet.
3) Canoga Mixers with torsion Bar suspension have a spring steel axle and independent suspension for smoother movement over rough highways (less bounce to the mixer, a smoother feel for the driver and vehicle towing the mixer).
4) Canoga Concrete Mixers offer "flow through gussets" and extra heavy duty mouth reinforcing rings.
5) Removable bowl shafts provide easy access for maintenance and repair.
6) Canoga towable equipment is equipped with special drop-forged 2" ball hitch insert with heavy duty hitch fork.
7) Welded hose ring to hang a hose nozzle so you do not have to pick up the hose from the ground each time (a hose nozzle left on the ground may be accidently stepped on squirting yourself, someone else, or getting your sacks of cement wet).
8) Metal pocket welded to the inside of the motor housing to hold the Owner's Manual & Parts List.
Concrete / Plaster Mixers
|
|
CANOGA 100-E CONCRETE MIXER
The CANOGA 100-E CONCRETE MIXER has a 1/2HP Electric Motor. The Batch Capacity is 1/3 to 1/2 Bag (3-1/2 Cubic Ft.) with a Total Volume of 6-1/3 Cubic Ft. The Drive is a single V-Belt to Cast Gear with a Ridged Axle. The Drum has a 26" Diameter, 28" Depth and 16" Opening. The two tires are 4.80 x 12", 480/12B 4-Ply Bias/Load Range B. The Canoga 100-E weighs 480lbs. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on Photo to see the FEATURES.
PRICE: $2,962.00
|
|
|
CANOGA 100-GH CONCRETE MIXER
The CANOGA 100-GH CONCRETE MIXER has a 4HP Gas Motor. The Batch Capacity is 1/3 to 1/2 Bag (3-1/2 Cubic Ft.) with a Total Volume of 6-1/3 Cubic Ft. The Drive is a single V-Belt to Cast Gear with a Ridged Axle. The Drum has a 26" Diameter, 28" Depth and 16" Opening. The two tires are 4.80 x 12", 480/12B 4-Ply Bias/Load Range B. The Canoga 100-G weighs 500lbs. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on Photo to see the FEATURES.
PRICE: $3,789.00
|
|
CANOGA 113-E CONCRETE MIXER
The CANOGA 113-E CONCRETE MIXER has a 1/2HP Electric Motor. The Batch Capacity is 1/3 to 1/2 Bag (3-1/2 Cubic Ft.) with a Total Volume of 6-1/3 Cubic Ft. The Drive is a single V-Belt to Cast Gear with a Torsion-Bar Axle. The Drum has a 26" Diameter, 28" Depth and 16" Opening. The two tires are 5.0 x 13", ST175/80D 13C 6-Ply Bias/Load Range C. The Canoga 113-E weighs 590lbs. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on Photo to see the FEATURES.
PRICE: $3,410.00
|
|
|
CANOGA 113-GH CONCRETE MIXER
The CANOGA 113-GH CONCRETE MIXER has a 4HP Gas Motor. The Batch Capacity is 1/3 to 1/2 Bag (3-1/2 Cubic Ft.) with a Total Volume of 6-1/3 Cubic Ft. The Drive is a single V-Belt to Cast Gear with a Torsion-Bar Axle. The Drum has a 26" Diameter, 28" Depth and 16" Opening. The two tires are 5.0 x 13", ST175/80D 13C 6-Ply Bias/Load Range C. The Canoga 113-GH weighs 590lbs. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on Photo to see the FEATURES.
PRICE: $3,886.00
|
|
CANOGA 193-E CONCRETE MIXER
The CANOGA 193-E CONCRETE MIXER has a 1HP Electric Motor. The Batch Capacity is 1/2 to 3/4 Bag (5 Cubic Ft.) with a Total Volume of 8-1/2 Cubic Ft. The Drive is a Dual V-Belt to Cast Gear with a Torsion-Bar Axle. The Drum has a 26" Diameter, 34" Depth and 16" Opening. The two tires are 5.0 x 13", ST175/80D 13C 6-Ply Bias/Load Range C. The Canoga 193-E weighs 700lbs. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on Photo to see the FEATURES.
PRICE: $4,360.00
|
|
|
CANOGA 193-GH CONCRETE MIXER
The CANOGA 193-GH CONCRETE MIXER has a 5-1/2HP Gas Motor. The Batch Capacity is 1/2 to 3/4 Bag (5 Cubic Ft.) with a Total Volume of 8-1/2 Cubic Ft. The Drive is a Dual V-Belt to Cast Gear with a Torsion-Bar Axle. The Drum has a 26" Diameter, 34" Depth and 16" Opening. The two tires are 5.0 x 13", ST175/80D 13C 6-Ply Bias/Load Range C. The Canoga 193-GH weighs 705lbs. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on Photo to see the FEATURES.
PRICE: $4,563.00
|
|
CANOGA 300-E CONCRETE MIXER
The CANOGA 300-E CONCRETE MIXER has a 1-1/2HP Electric Motor. The Batch Capacity is 1-1/2 to 2 Bags (9 Cubic Ft.) with a Total Volume of 15 Cubic Ft. The Drive is a Dual V-Belts to Cast Gear with a Torsion-Bar Axle. The Drum has a 34" Diameter, 38" Depth and 19" Opening. The two tires are 5.0 x 13", ST175/80D 13C 6-Ply Bias/Load Range C. The Canoga 300-E weighs 1,060lbs. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on Photo to see the FEATURES.
PRICE: $5,732.00
|
|
|
CANOGA 300-GH CONCRETE MIXER
The CANOGA 300-GH CONCRETE MIXER has a 8HP Gas Motor. The Batch Capacity is 1-1/2 to 2 Bags (9 Cubic Ft.) with a Total Volume of 15 Cubic Ft. The Drive is a Dual V-Belts to Cast Gear with a Torsion-Bar Axle. The Drum has a 34" Diameter, 38" Depth and 19" Opening. The two tires are 5.0 x 13", ST175/80D 13C 6-Ply Bias/Load Range C. The Canoga 300-E weighs 1,060lbs. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on Photo to see the FEATURES.
PRICE: $6,397.00
|
|
CANOGA 80 UTILITY CONCRETE MIXER
The CANOGA 80 UTILITY CONCRETE MIXER has a 1/3HP Electric Motor. The Batch Capacity is 1/4 to 1/3 Bag (2 Cubic Ft.) with a Total Volume of 4 Cubic Ft. The Drive is a single V-Belt & Gear with a center stand Axle. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on the Photo to see a larger view.
PRICE: $1,088.00
|
|
CANOGA 890-GH PLASTER MIXER
The CANOGA 890-GH PLASTER MIXER has a 8HP Gas Motor with an 8:1 reduction. The Batch Capacity is 2 to 3 Bags (8 Cubic Ft.) with a Total Volume of 10.2 Cubic Ft. The Drive is a Triple V-Belt to Bull and Pinion Gear with a Rigid Axle. The two tires are 5.0 x 13", ST175/80D 13C 6-Ply Bias/Load Range C. The Canoga 890-GH weighs 984lbs. All Mixers are shipped via LTL Truck FOB Factory. Freight Charges are prepaid to any destination in the 48 Continental United States, subject to our shipping policies. Click on Photo to see the FEATURES.
PRICE: $6,116.00
|
MK Diamond manufactures a wide variety of Concrete Saws engineered for high-performance and reliability. From lightweight portable saws for the general contractor, to high horsepower self-propelled saws for the concrete professional, MK Diamond has the tools to complete any concrete project. MK Diamond also provides a wide range of concrete and asphalt Diamond Blades, ranging from general purpose Diamond Blades to application-specific professional Diamond Blades.
Concrete Products
|
|
MK-1608H 16" WALK-BEHIND CONCRETE HONDA GAS STANDARD SAW
The MK-1608H 16" WALK-BEHIND CONCRETE HONDA GAS STANDARD SAW, Part#157867, has a 8HP Honda Cyclone 3600RPM motor. The Depth of cut is 5-5/8" for a 16" Blade. The MK-1608H cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,079.00
|
|
Concrete Products
|
Walk-Behind Concrete Saws
|
|
BD-4500 4" HAND-HELD TILE SAW KIT
The BD-4500 4" HAND-HELD TILE SAW KIT comes with a 10 Amp 120V / 60Hz Motor whose RPM speed is 11,800.. The 4" Blade has a 20mm-5/8" Arbor. The Saw has a blade capacity of 4-3/8", cutting capacity is 1-1/8" in Depth, also Cuts 1" Depth at 45 degrees. 7lb Shipping Weight via Fed-Ex, Part#BD-163993. Click on Photo to see the FEATURES and INCLUDED ACCESSORIES.
PRICE: $109.99
|
|
MK-1608H 16" WALK-BEHIND CONCRETE GAS PREMIUM SAW
The MK-1608H 16" WALK-BEHIND CONCRETE GAS PREMIUM SAW, Part#157866, has a 8HP Honda Cyclone 3600RPM motor. The Depth of cut is 5-5/8" for a 16" Blade. The MK-1608H cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES
PRICE: $2,169.00
|
|
|
MK-1608H 16" WALK-BEHIND CONCRETE HONDA GAS STANDARD SAW
The MK-1608H 16" WALK-BEHIND CONCRETE HONDA GAS STANDARD SAW, Part#157867, has a 8HP Honda Cyclone 3600RPM motor. The Depth of cut is 5-5/8" for a 16" Blade. The MK-1608H cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,079.00
|
|
MK-1613H 16" WALK-BEHIND CONCRETE GAS SAW PREMIUM
The MK-1613H 16" WALK-BEHIND CONCRETE GAS SAW PREMIUM, Part#157789, has a 13HP Honda Cyclone 3600RPM motor. The Depth of cut is 5-5/8" for a 16" Blade. The MK-1613H cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,439.00
|
|
MK-1613H 16" WALK-BEHIND CONCRETE HONDA GAS SAW STANDARD
The MK-1613H 16" WALK-BEHIND CONCRETE HONDA GAS SAW STANDARD, Part#157864, has a 13HP Honda Cyclone 3600RPM motor. The Depth of cut is 5-5/8" for a 16" Blade. The MK-1613H cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,289.00
|
|
|
MK-1613H-18 18" WALK-BEHIND CONCRETE GAS SAW PREMIUM
The MK-1613H-18 18" WALK-BEHIND CONCRETE GAS SAW PREMIUM, Part#160772, has a 13HP Honda Cyclone motor. The Depth of cut is 5-5/8" for a 16" Blade and 6-5/8" for a 18" Blade. The MK-1613H-18 cuts to within 1" of a wall and is able to R/L hand cut. The Motor's RPM's are 3600 for a 16" Blade and 2600 for a 18" Blade. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,439.00
|
|
MK-1613H-18 18" WALK-BEHIND CONCRETE HONDA GAS SAW STANDARD
The MK-1613H-18 18" WALK-BEHIND CONCRETE HONDA GAS SAW STANDARD, Part#160832, has a 13HP Honda Cyclone motor. The Depth of cut is 5-5/8" for a 16" Blade and 6-5/8" for a 18" Blade. The MK-1613H-18 cuts to within 1" of a wall and is able to R/L hand cut. The Motor's RPM's are 3600 for a 16" Blade and 2600 for a 18" Blade. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,289.00
|
|
MK-2013HE 16" WALK-BEHIND CONCRETE HONDA GAS SAW
The MK-2013HE 16" WALK-BEHIND CONCRETE HONDA GAS SAW, Part#155714, has a 13HP Honda Cyclone Gas motor with a fuel capacity of 1.7 gallons. The Depth of cut is 5-5/8" for a 16" Blade. The MK-2013HE cuts to within 1" of a wall, is able to R/L hand cut and has a Electric Start. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $3,929.00
|
|
MK-2013HSP 16" WALK-BEHIND CONCRETE HONDA GAS SAW
The MK-2013HSP 16" WALK-BEHIND CONCRETE HONDA GAS SAW, Part#156499, has a 13HP Honda Cyclone Gas motor with a fuel capacity of 1.7 gallons. The Depth of cut is 5-5/8" for a 16" Blade. The MK-2013HSP cuts to within 1" of a wall, is able to R/L hand cut and has a Pull Start. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $3,679.00
|
|
|
MK-2020HSP 20" WALK-BEHIND CONCRETE HONDA GAS SAW
The MK-2020HSP 20" WALK-BEHIND CONCRETE HONDA GAS SAW, Part#156498, has a 20HP Honda Twin-V Gas motor with a fuel capacity of 2.0 gallons. The Depth of cut is 7-5/8" for a 20" Blade. The MK-2020HSP cuts to within 1" of a wall, is able to R/L hand cut and has a Electric Start. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $5,389.00
|
|
MK-2020KSP 16" WALK-BEHIND CONCRETE PROPANE KOHLER GAS SAW
THE MK-2020KSP 16" WALK-BEHIND CONCRETE PROPANE KOHLER GAS SAW, Part#158776, has a 20HP Kohler Propane motor with a fuel capacity of a 5 gallon (20lb.Tank) propane bottle. The Depth of cut is 7-5/8" for a 20" Blade. The MK-2020KSP cuts to within 1" of a wall, is able to R/L hand cut and has a Electric Start. The MK-2020KSP meets all EPA requirements. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $6,359.00
|
|
MK-2024HSP 20" WALK-BEHIND CONCRETE HONDA GAS SAW
The MK-2024HSP 20" WALK-BEHIND CONCRETE HONDA GAS SAW, Part#158777, has a 24HP Honda Twin-V Gas motor with a fuel capacity of 1.7 gallons. The Depth of cut is 7-5/8" for a 20" Blade. The MK-2024HSP cuts to within 1" of a wall, is able to R/L hand cut and has a Electric Start. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $5,519.00
|
|
MK-4024 24" 35HP WISCONSIN GAS WALK-BEHIND CONCRETE SAW
The MK-4024 24" 35HP WISCONSIN GAS WALK-BEHIND CONCRETE SAW, Part#162465, is made in the USA. The blade shaft RPM is 2000 for a 24" guard and 1500 for a 30" guard. The depth of cut capacity is 10" for a 24" Blade, 12-1/2" for a 30" Blade and 15" for a 36" Blade. The arbor is a 1" with a 3/8" Drive Pin. The MK-4000 Series has an Electric Starting System, fuel capacity is 6.75 Gallons, travel speed in 0-220 FPM Forward and 0-100 FPM Reverse, Handle extension is 22", Maximum Pointer Extension is 20", Outside to Outside Wheel Width in Front is 23-3/4" and 27-3/4" in Rear, Blade to wall or curb distance is 1-7/8" and wheel base length is 20". FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES. NOTE: CALL FOR CURRENT AVAILABILITY.
PRICE: $11,459.88
|
|
|
MK-4024D 24" 29HP DIESEL WALK BEHIND CONCRETE SAW
The MK-4024D 24" 29HP DIESEL WALK BEHIND CONCRETE SAW, Part#162468, is assembled in the USA. The blade shaft RPM is 2000 for a 24" guard and 1500 for a 30" guard. The depth of cut capacity is 10" for a 24" Blade, 12-1/2" for a 30" Blade and 15" for a 36" Blade. The arbor is a 1" with a 3/8" Drive Pin. The MK-4000D Series has an Electric Starting System, fuel capacity is 6.75 Gallons, travel speed in 0-220 FPM Forward and 0-100 FPM Reverse, Handle extension is 22", Maximum Pointer Extension is 20", Outside to Outside Wheel Width in Front is 23-3/4" and 27-3/4" in Rear, Blade to wall or curb distance is 1-7/8" and wheel base length is 20". FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES. NOTE: CALL FOR CURRENT AVAILABILITY.
PRICE: $12,488.88
|
|
|
MK-4030 30" 35HP WISCONSIN GAS WALK-BEHIND CONCRETE SAW
The MK-4030 30" 35HP WISCONSIN GAS WALK-BEHIND CONCRETE SAW, Part#162466, is made in the USA. The blade shaft RPM is 1500 for a 30" guard. The depth of cut capacity is 10" for a 24" Blade, 12-1/2" for a 30" Blade and 15" for a 36" Blade. The arbor is a 1" with a 3/8" Drive Pin. The MK-4000 Series has an Electric Starting System, fuel capacity is 6.75 Gallons, travel speed in 0-220 FPM Forward and 0-100 FPM Reverse, Handle extension is 22", Maximum Pointer Extension is 20", Outside to Outside Wheel Width in Front is 23-3/4" and 27-3/4" in Rear, Blade to wall or curb distance is 1-7/8" and wheel base length is 20". FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES. NOTE: CALL FOR CURRENT AVAILABILITY.
PRICE: $11,568.88
|
|
|
MK-4030D 29HP DEUTZ DIESEL 30" CONCRETE SAW
The MK-4030D 29HP DEUTZ DIESEL 30" CONCRETE SAW, Part#162469, is assembled in the USA. The blade shaft RPM is 1500 for a 30" guard. The depth of cut capacity is 10" for a 24" Blade, 12-1/2" for a 30" Blade and 15" for a 36" Blade. The arbor is a 1" with a 3/8" Drive Pin. The MK-4000D Series has an Electric Starting System, fuel capacity is 6.75 Gallons, travel speed in 0-220 FPM Forward and 0-100 FPM Reverse, Handle extension is 22", Maximum Pointer Extension is 20", Outside to Outside Wheel Width in Front is 23-3/4" and 27-3/4" in Rear, Blade to wall or curb distance is 1-7/8" and wheel base length is 20". FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES. NOTE: CALL FOR CURRENT PRICING AND AVAILABILITY. Click on Photo to see the FEATURES and Included ACCESSORIES. NOTE: CALL FOR CURRENT PRICING AND AVAILABILITY.
PRICE: $12,888.88
|
|
MK-9136H 16" WALK-BEHIND CONCRETE HONDA GAS SAW
The MK-9136H 16" WALK-BEHIND CONCRETE HONDA GAS SAW, Part#150826, has a 13HP Honda Cyclone 3600RPM motor. The Depth of cut is 5-5/8" for a 16" Blade. The MK-9136H cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,669.00
|
|
MK-9514E1 14" WALK-BEHIND CONCRETE 1PH 230V SAW
The MK-9514E1 14" WALK-BEHIND CONCRETE 1PH 230V SAW, Part#150936, has a 5HP 230V Single Phase 3450RPM motor. The Depth of cut is 4-5/8" for a 14" Blade. The MK-9514E1 cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,979.00
|
|
|
MK-9514E3 14" WALK-BEHIND CONCRETE 3PH 230/460V SAW
The MK-9514E3 14" WALK-BEHIND CONCRETE 3PH 230/460V SAW, Part#150934, has a 5HP 230/460V Three Phase 3450RPM motor. The Depth of cut is 4-5/8" for a 14" Blade. The MK-9514E3 cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,759.00
|
|
MK-9816H 16" WALK-BEHIND CONCRETE HONDA GAS SAW
The MK-9816H 16" WALK-BEHIND CONCRETE HONDA GAS SAW, Part#150825, has a 8HP Honda Cyclone 3600RPM motor. The Depth of cut is 5-5/8" for a 16" Blade. The MK-9816H cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,199.00
|
|
MK-CX3H 14" WALK-BEHIND CONCRETE XTREME HONDA GAS SAW
The MK-CX3H 14" WALK-BEHIND CONCRETE XTREME HONDA GAS SAW, Part#159345, has a 6-1/2HP Honda Cyclone 3600RPM motor. The Depth of cut is 5-1/2" for a 14" Blade. The MK-CX3H cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,429.99
|
|
MK-CX3R 14" WALK-BEHIND CONCRETE XTREME ROBIN GAS SAW
The MK-CX3R 14" WALK-BEHIND CONCRETE XTREME ROBIN GAS SAW, Part#159346, has a 6HP Robin Cyclonic Air Filter 3600RPM motor. The Depth of cut is 5-1/2" for a 14" Blade. The MK-CX3R cuts to within 1" of a wall and is able to R/L hand cut. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,129.90
|
|
Concrete Products
|
Surface Grinders
|
|
BD-2515LA 5" AIR ANGLE GRINDER
The BD-2515LA 5" AIR ANGLE GRINDER, Part#BD-170458, is designed for continuous production applications and improved safety. The Air Consumption is 15cfm at 90 psi (requires a 5HP compressor or larger to operate properly). It has a no-load 10,000RPM with a 5/8"-11 spindle. The Maximum Disc Size is 5". The BD-2515LA weighs 4 lbs and is 9" in length. The air inlet is 1/4"NPT. The Sound range is from 87DB's to 100DB's. Ships via UPS/FedEx. Click on the Photo to see the FEATURES and INCLUDED ACCESSORIES.
PRICE: $267.75
|
|
MK-1010H SURFACE GRINDING HEADS
The MK-1010H SURFACE GRINDING HEADS, Part#158181, is a Premium grade 10-Segment designed to give rough concrete surfaces the smoothest finish in the quickest time. The MK-1010H Grinding Head works BEST for soft materials such as Green Concrete and Asphalt. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see a larger view.
PRICE: $215.88
|
|
|
MK-1010S SURFACE GRINDING HEADS
The MK-1010S SURFACE GRINDING HEADS, Part#151925, is a Premium grade 10-Segment designed to give rough concrete surfaces the smoothest finish in the quickest time. The MK-1010S Grinding Head works BEST for hard materials such as Old or Cured Concrete. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see a larger view.
PRICE: $215.88
|
|
MK-1020H SURFACE GRINDING HEADS
The MK-1020H SURFACE GRINDING HEADS, Part#158182, is a Premium grade 20-Segment designed to give rough concrete surfaces the smoothest finish in the quickest time. The MK-1010H Grinding Head works BEST for soft materials such as Green Concrete and Asphalt. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see a larger view.
PRICE: $298.88
|
|
|
MK-1020S SURFACE GRINDING HEADS
The MK-1020S SURFACE GRINDING HEADS, Part#151926, is a Premium grade 20-Segment designed to give rough concrete surfaces the smoothest finish in the quickest time. The MK-1020S Grinding Head works BEST for hard materials such as Old or Cured Concrete. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see a larger view.
PRICE: $298.88
|
|
MK-DDG-1.5 1-1/2HP 115/230V BALDOR WALK-BEHIND CONCRETE SURFACE GRINDER
The MK-DDG-1.5 1-1/2HP 115/230V BALDOR WALK-BEHIND CONCRETE SURFACE GRINDER, Part#161110, is a double -head surface grinder with a 1-1/2HP Baldor 115/230V Electric Motor. The Disc Capacity is 10" and the disc has a 550RPM. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $3,298.88
|
|
MK-DDG-11 11HP HONDA GAS WALK-BEHIND CONCRETE SURFACE GRINDER
The MK-DDG-11 11HP HONDA GAS WALK-BEHIND CONCRETE SURFACE GRINDER, Part#157012, is a double -head surface grinder with a 11HP Honda Gas Motor. The Disc Capacity is 10" and the disc has a 550RPM. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $3,788.88
|
|
MK-DDG-5 5HP 230V BALDOR CONCRETE SURFACE GRINDER
The MK-DDG-5 5HP 230V BALDOR CONCRETE SURFACE GRINDER, Part#158780, is a double -head surface grinder with a 5HP Baldor 230V Electric Motor. The Disc Capacity is 10" and the disc has a 550RPM. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,988.88
|
|
MK-SDG-11 11HP HONDA GAS CONCRETE SURFACE GRINDER
The MK-SDG-11 11HP HONDA GAS CONCRETE SURFACE GRINDER, Part#157377, is a single head surface grinder with a 11HP Honda Gas Motor. The Disc Capacity is 10" and the disc has a 980RPM. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,388.88
|
|
MK-SDG-3 3HP 115/230V BALDOR WALK-BEHIND CONCRETE SURFACE GRINDER
The MK-SDG-3 3HP 115/230V BALDOR WALK-BEHIND CONCRETE SURFACE GRINDER, Part#161180, is a single head surface grinder with a 3HP Baldor 115/230V Motor. The Disc Capacity is 10" and the disc has a 980RPM. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,488.88
|
|
Concrete Products
|
Scarifiers
|
|
|
MK-SG-5 5HP 1PH 230V BALDOR WALK-BEHIND SCARIFIER WITH 5 PT CARBIDE DRUM
The MK-SG-5 5HP 1PH 230V BALDOR WALK-BEHIND SCARIFIER WITH 5 PT CARBIDE DRUM, Part #165276, is designed for scarifying, roughening, planing, leveling, smoothing or creating grooves in concrete surfaces. Depending on the cutting wheel style, production rate varies from 350 to 500 square feet per hour for a 1/8" removal depth. The Drum dimensions are 6" x 8". FREE Shipping via LTL Truck. Photo unavailable at this time. Click on Text to see the FEATURES and Included ACCESSORIES.
PRICE: $2,988.88
|
|
|
MK-SG-5 5HP 1PH 230V BALDOR WALK-BEHIND SCARIFIER WITH BLANK DRUM (NO CUTTERS INCLUDED)
The MK-SG-5 5HP 1PH 230V BALDOR WALK-BEHIND SCARIFIER WITH BLANK DRUM (NO CUTTERS INCLUDED), Part #158533, is designed for scarifying, roughening, planing, leveling, smoothing or creating grooves in concrete surfaces. Depending on the cutting wheel style, production rate varies from 350 to 500 square feet per hour for a 1/8" removal depth. The Drum dimensions are 6" x 8". FREE Shipping via LTL Truck. Photo unavailable at this time. Click on Text to see the FEATURES and Included ACCESSORIES.
PRICE: $2,488.88
|
|
MK-SG-9 9HP HONDA WALK-BEHIND SCARIFIER W/18PT SHARP-TOOTH DRUM
The MK-SG-9 9HP HONDA WALK-BEHIND SCARIFIER W/18PT SHARP-TOOTH DRUM, Part #158943, is designed for scarifying, roughening, planing, leveling, smoothing or creating grooves in concrete surfaces. Depending on the cutting wheel style, production rate varies from 350 to 500 square feet per hour for a 1/8" removal depth. The Drum dimensions are 6" x 8". FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,588.88
|
|
|
MK-SG-9 9HP HONDA WALK-BEHIND SCARIFIER W/5pt CARBIDE DRUM
The MK-SG-9 9HP HONDA WALK-BEHIND SCARIFIER W/5pt CARBIDE DRUM, Part #158941, is designed for scarifying, roughening, planing, leveling, smoothing or creating grooves in concrete surfaces. Depending on the cutting wheel style, production rate varies from 350 to 500 square feet per hour for a 1/8" removal depth. The Drum dimensions are 6" x 8". FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,998.88
|
|
|
MK-SG-9 9HP HONDA WALK-BEHIND SCARIFIER W/6pt CARBIDE DRUM
The MK-SG-9 9HP HONDA WALK-BEHIND SCARIFIER W/6pt CARBIDE DRUM, Part #158942, is designed for scarifying, roughening, planing, leveling, smoothing or creating grooves in concrete surfaces. Depending on the cutting wheel style, production rate varies from 350 to 500 square feet per hour for a 1/8" removal depth. The Drum dimensions are 6" x 8". FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $3,188.88
|
|
|
MK-SG-9 9HP HONDA WALK-BEHIND SCARIFIER W/BLANK DRUM (NO CUTTERS)
The MK-SG-9 9HP HONDA WALK-BEHIND SCARIFIER W/BLANK DRUM (NO CUTTERS), Part #158532, is designed for scarifying, roughening, planing, leveling, smoothing or creating grooves in concrete surfaces. Depending on the cutting wheel style, production rate varies from 350 to 500 square feet per hour for a 1/8" removal depth. The Drum dimensions are 6" x 8". FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,498.88
|
|
|
MK-SG-9 WALK-BEHIND 9HP HONDA SCARIFIER WITH 12PT BLUNT TOOTH DRUM
The MK-SG-9 WALK-BEHIND 9HP HONDA SCARIFIER WITH 12PT BLUNT TOOTH DRUM, Part #158944, is designed for scarifying, roughening, planing, leveling, smoothing or creating grooves in concrete surfaces. Depending on the cutting wheel style, production rate varies from 350 to 500 square feet per hour for a 1/8" removal depth. The Drum dimensions are 6" x 8". FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $2,588.88
|
|
SCARIFIER 5pt CARBIDE CUTTING WHEELS
The SCARIFIER 5pt CARBIDE CUTTING WHEELS, Part#158492, is used with and is a replaceable part for the SG-9 Scarifier Hardened Steel Drums. Ships via FedEx. Click on the Photo to see a larger view.
PRICE: $8.98
|
|
SCARIFIER 8" DRUM W/ 78-6PT CARBIDE CUTTING WHEELS
The SCARIFIER 8" DRUM W/78-6PT CARBIDE CUTTING WHEELS, Part#158584, has dimensions of 6" x 8". There are 78 individual 6 Point Carbide Cutters within the 8" Hardened Steel Drum. FREE Shipping via FedEx. Click on the Photo to see a larger view.
PRICE: $1,288.88
|
|
SCARIFIER 8" DRUM W/84-5pt CARBIDE CUTTING WHEELS
The SCARIFIER 8" DRUM W/84-5pt CARBIDE CUTTING WHEELS, Part#158583, has dimensions of 6" x 8". There are 84 individual 5 Point Carbide Cutters within the 8" Hardened Steel Drum. FREE Shipping via FedEx. Click on the Photo (photo shown is a 6pt Carbide Drum) to see a larger view.
PRICE: $1,188.88
|
|
SCARIFIER 8" DRUM w/114-12pt STEEL BLUNT-TOOTH CUTTING WHEELS
The SCARIFIER 8" DRUM w/114-12pt STEEL BLUNT-TOOTH CUTTING WHEELS, Part#158586, has dimensions of 6" x 8". There are 114 individual Steel Blunt 12 Point Cutters within the 8" Hardened Steel Drum. FREE Shipping via FedEx. Click on the Photo to see a larger view.Photo shown is a 18pt Steel Sharp Tooth Scarifier Drum.
PRICE: $448.88
|
|
SCARIFIER 8" DRUM w/114-18pt STEEL SHARP TOOTH CUTTING WHEELS
The SCARIFIER 8" DRUM w/114-18pt STEEL SHARP TOOTH CUTTING WHEELS, Part#158585, has dimensions of 6" x 8". There are 114 individual Steel Sharp 18 Point Cutters within the 8" Hardened Steel Drum. FREE Shipping via FedEx. Click on the Photo to see a larger view.
PRICE: $698.88
|
|
|
SCARIFIER CUTTING WHEELS-CARBIDE 6 POINT
The SCARIFIER CARBIDE 6 POINT CUTTING WHEEL, Part#158493, is used with and is a replaceable part for the SG-9 Scarifier Hardened Steel Drums. Ships via FedEx. Click on the Photo to see a larger view.
PRICE: $12.88
|
|
|
SCARIFIER CUTTING WHEELS-STEEL BLUNT TOOTH 12 POINT
The SCARIFIER STEEL BLUNT TOOTH 12 POINT CUTTING WHEEL, Part#158495, is used with and is a replaceable part for the SG-9 Scarifier Hardened Steel Drums. Ships via FedEx. Click on the Photo to see a larger view.
PRICE: $2.28
|
|
|
SCARIFIER CUTTING WHEELS-STEEL SHARP TOOTH 18 POINT
The SCARIFIER STEEL SHARP TOOTH 18 POINT CUTTING WHEEL, Part#158494, is used with and is a replaceable part for the SG-9 Scarifier Hardened Steel Drums. Ships via FedEx. Click on the Photo to see a larger view.
PRICE: $2.58
|
|
|
SCARIFIER DRUM PARTS-HARDENED STEEL SHAFT
The SCARIFIER DRUM PARTS-HARDENED STEEL SHAFT, Part#158463, is used with and is a replaceable part for the SG-9 Scarifier Hardened Steel Drums. Ships via FedEx. Photo unavailable at this time.
PRICE: $19.88
|
|
SCARIFIER DRUM PARTS-HARDENED STEEL SPACER
The SCARIFIER DRUM PARTS-HARDENED STEEL SPACER, Part#158575, is used with and is a replaceable part for the SG-9 Scarifier Hardened Steel Drums. Ships via FedEx. Click on the Photo to see a larger view.
PRICE: $0.98
|
|
Concrete Products
|
Diamond Cup Wheels- Wet/Dry Cutting
|
|
604 RUBBER SHOCK ADAPTER-CUP WHEELS
The 604 RUBBER SHOCK ADAPTER is a 604 Series Cup Wheel Adapter - 7/8" arbor to 5/8"-11 thread. Ships via FedEx, Part#162793. Click on the Photo to see a larger view.
PRICE: $49.88
|
|
BD-360T WET-GRINDING TURBO DIAMOND CUP WHEELS
The BD-360T WET-GRINDING TURBO DIAMOND CUP WHEELS have a unique shape which allows for superior form mark removal for Stone and Concrete. These highly efficient cup wheels are also effective in the process of concrete deburring and rough-surface grinding. They are designed for fast, clean grinding and smooth finishes on rough stone. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue. They can be used wet or dry. They have a double-row of Turbo-designed diamond segments. FREE Shipping via FedEx Economy 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see all sizes available.
PRICE: $96.88
|
|
BD-380R DRY-CUTTING CONTINUOUS RIM DIAMOND GRINDING WHEELS
The BD-380R DRY-CUTTING CONTINUOUS RIM DIAMOND GRINDING WHEELS are engineered for groove and saw mark removal from slabs. They are used for clean, chip-free grinding of Granite and Marble Edges. They have a 5/8"-11 Nut.FREE Shipping via FedEx Economy 2nd Day per "FREE SHIPPING SPECIAL". Click on Photo to see available sizes and grits.
PRICE: $129.99
|
|
MK 304CG-1 STONE AND CONCRETE STANDARD DIAMOND CUP WHEELS-SINGLE ROW
The MK 304CG-1 STONE AND CONCRETE STANDARD DIAMOND CUP WHEELS-SINGLE ROW have a unique shape which allows for superior form mark removal. These highly efficient cup wheels are also effective in the process of concrete deburring and rough-surface grinding. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue. They can be used wet or dry. They have a single-row of diamond segments. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see all sizes available.
PRICE: $79.88
|
|
MK 304SG-2 STONE AND CONCRETE STANDARD DIAMOND CUP WHEELS-DOUBLE ROW
The MK 304SG-2 STONE AND CONCRETE STANDARD DIAMOND CUP WHEELS-DOUBLE ROW have a unique shape which allows for superior form mark removal. These highly efficient cup wheels are also effective in the process of concrete deburring and rough-surface grinding. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue. They can be used wet or dry. They have a double-row of diamond segments. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see all sizes available.
PRICE: $119.88
|
|
|
MK 404CG-1 STONE AND CONCRETE PREMIUM DIAMOND CUP WHEELS-SINGLE ROW
The MK 404CG-1 STONE AND CONCRETE PREMIUM DIAMOND CUP WHEELS-SINGLE ROW have a unique shape which allows for superior form mark removal. These highly efficient cup wheels are also effective in the process of concrete deburring and rough-surface grinding. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue. They can be used wet or dry. They have a single-row of diamond segments. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see all sizes available.
PRICE: $79.88
|
|
|
MK 404SG-2 STONE AND CONCRETE PREMIUM DIAMOND CUP WHEELS-DOUBLE ROW
The MK 404SG-2 STONE AND CONCRETE PREMIUM DIAMOND CUP WHEELS-DOUBLE ROW have a unique shape which allows for superior form mark removal. These highly efficient cup wheels are also effective in the process of concrete deburring and rough-surface grinding. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue. They can be used wet or dry. They have a double-row of diamond segments. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see all sizes available.
PRICE: $128.88
|
|
MK 504CG-1 STONE AND CONCRETE SUPREME DIAMOND CUP WHEELS-SINGLE ROW
The MK 504CG-1 STONE AND CONCRETE SUPREME DIAMOND CUP WHEELS-SINGLE ROW have a unique shape which allows for superior form mark removal for Stone and Concrete. These highly efficient cup wheels are also effective in the process of concrete deburring and rough-surface grinding. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue. They can be used wet or dry. They have a single-row of Turbo-designed diamond segments. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see all sizes available.
PRICE: $94.88
|
|
MK 604CG-1 EPOXY/PAINT REMOVAL SUPREME PCD DIAMOND CUP WHEELS-SINGLE ROW
The MK 604CG-1 EPOXY/PAINT REMOVAL SUPREME PCD DIAMOND CUP WHEELS-SINGLE ROW have a unique shape which allows for superior form mark removal of Epoxy / Paint Removal. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue. They can be used wet or dry. They have a single-row of diamond segments. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see all sizes available.
PRICE: $158.88
|
|
MK 604SG-2 EPOXY/PAINT REMOVAL SUPREME PCD DIAMOND CUP WHEELS-DOUBLE ROW
The MK 604SG-2 EPOXY/PAINT REMOVAL SUPREME PCD DIAMOND CUP WHEELS-DOUBLE ROW have a unique shape which allows for superior form mark removal of Epoxy / Paint Removal. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue. They can be used wet or dry. They have a double-row of diamond segments. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see all sizes available.
PRICE: $209.88
|
|
Concrete Products
|
Concrete Accessories
|
|
GRINDING PELLETS
The GRINDING PELLETS are Diamond Button Segments designed to work with production concrete grinders on most Masonry Products. FREE Shipping via FedEx Economy 2nd Day per "FREE SHIPPING SPECIAL." Click on photo to see available sizes.
PRICE: $49.88
|
|
GROUND FAULT INTERRUPTOR-120V/15AMP
The GROUND FAULT INTERRUPTOR-120V/15AMP helps to provide operator protection from electrical hazards such as those created by a fault in the proper grounding of equipment or electrical system. Ships via FedEx, Part#152610. Click on photo to see enlarged view.
PRICE: $48.95
|
|
POWER CORD ADAPTER-(2) FEMALE TWIST LOCK- (1) MALE TWIST LOCK
The POWER CORD ADAPTER-(2) FEMALE TWIST LOCK- (1) MALE TWIST LOCK is a multi-tap UL cord with molded ends. Ships via FedEx, Part#BD-164030. Click on photo to see enlarged view.
PRICE: $41.88
|
|
POWER CORD ADAPTER-FEMALE PLUG-MALE TWIST LOCK
The POWER CORD ADAPTER-FEMALE PLUG-MALE TWIST LOCK is UL with molded ends. Ships via FedEx, Part#BD-164029. Click on photo to see enlarged view.
PRICE: $25.88
|
|
POWER CORD ADAPTER-FEMALE TWIST LOCK-MALE PLUG
The POWER CORD ADAPTER-FEMALE TWIST LOCK-MALE PLUG is UL with molded ends. Ships via FedEx, Part#BD-164028. Click on photo to see enlarged view.
PRICE: $23.88
|
|
WATER PUMP FOR MK-20 SERIES CONCRETE SAWS
The WATER PUMP FOR MK-20 SERIES CONCRETE SAWS, Part#152637, is a heavy-duty electric water pump. Includes all fittings shown in photo. FREE Shipping via FedEx. Click on the Photo to see a larger view and related products.
PRICE: $478.88
|
|
WATER TANK- CONCRETE SAWS-2000 & 1600 SERIES
The WATER TANK- CONCRETE SAWS-2000 & 1600 SERIES, Part#157852, is a 6-1/2 Gallon Water Tank Kit designed for MK-20 and MK-1600 series saws. Includes straps, buckles, hoses, hose clamps, t-fitting, cap and water valve. Requires lifting bail (not included) for mounting. Ships via FedEx. Click on the Photo to see a larger view.
PRICE: $148.88
|
MK Diamond manufactures Core Rigs, Hand-held Drills and Diamond Core Bits which are engineered to stand up to the rigors of the professional coring market. These tools deliver exceptional drilling performance in a wide range of concrete and masonry applications.
Coring Products
|
|
MK-BLACK CORE BITS- SUPREME GRADE FOR WET-CUTTING CONCRETE & ASPHALT
The MK-BLACK CORE BITS- SUPREME GRADE FOR WET-CUTTING CONCRETE & ASPHALT are engineered for exceptional footage and fast/aggressive drilling characteristics when cutting Concrete and Asphalt up to a drilling depth of 14". Excellent performance in applications associated with moderate to high steel reinforcement. FREE Shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL". Click on the Photo to see all sizes available.
PRICE: $97.88
|
|
Coring Products
|
Core Drill Rigs
|
|
MANTA I CORE DRILL RIGS WITH ANCHOR BASE DRILL STAND
The MANTA I CORE DRILL RIGS WITH ANCHOR BASE DRILL STAND are Made in the USA. Manta I Core Rigs have a 1/2" to 12" (14" w/spacer, Part#155614) Bit Capacity, a 27" Bit Feed, a 1-1/4"-7 Spindle and a 2-1/2" x 2-1/2" adjustable Rack and Pinion Column. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,533.75
|
|
MANTA I CORE DRILL RIGS WITH COMBINATION BASE DRILL STAND
The MANTA I CORE DRILL RIGS WITH COMBINATION BASE DRILL STAND are Made in the USA. Manta I Core Rigs have a 1/2" to 12" (14" w/spacer, Part#155614) Bit Capacity, a 27" Bit Feed, a 1-1/4"-7 Spindle and a 2-1/2" x 2-1/2" adjustable Rack and Pinion Column. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,969.85
|
|
MANTA II CORE DRILL RIGS WITH ANCHOR BASE DRILL STAND
The MANTA II CORE DRILL RIGS WITH ANCHOR BASE DRILL STAND are Made in the USA. Manta II Core Rigs have a 1/2" to 12" (14" w/spacer, Part#155614) Bit Capacity, a 27" Bit Feed, a 1-1/4"-7 Spindle and a 2-1/2" x 2-1/2" adjustable Rack and Pinion Column. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,897.85
|
|
MANTA II CORE DRILL RIGS WITH COMBINATION BASE DRILL STAND
The MANTA II CORE DRILL RIGS WITH COMBINATION BASE DRILL STAND are Made in the USA. Manta II Core Rigs have a 1/2" to 12" (14" w/spacer, Part#155614) Bit Capacity, a 27" Bit Feed, a 1-1/4"-7 Spindle and a 2-1/2" x 2-1/2" adjustable Rack and Pinion Column. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,949.00
|
|
MANTA III CORE DRILL RIGS WITH ANCHOR TILT BASE DRILL STAND
The MANTA III CORE DRILL RIGS WITH ANCHOR TILT BASE DRILL STAND are Made in the USA. Manta III Core Rigs have a 1/2" to 12" (14" w/spacer, Part#155614) Bit Capacity, a 27" Bit Feed, a 1-1/4"-7 Spindle and a 2-1/2" x 2-1/2" adjustable Rack and Pinion Column. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,889.90
|
|
MANTA III CORE DRILL RIGS WITH COMBINATION BASE DRILL STAND
The MANTA III CORE DRILL RIGS WITH COMBINATION BASE DRILL STAND are Made in the USA. Manta III Core Rigs have a 1/2" to 12" (14" w/spacer, Part#155614) Bit Capacity, a 27" Bit Feed, a 1-1/4"-7 Spindle and a 2-1/2" x 2-1/2" adjustable Rack and Pinion Column. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,729.90
|
|
MANTA III CORE DRILL RIGS WITH COMBO TILT BASE DRILL STAND
The MANTA III CORE DRILL RIGS WITH COMBO TILT BASE DRILL STAND are Made in the USA. Manta III Core Rigs have a 1/2" to 12" (14" w/spacer, Part#155614) Bit Capacity, a 27" Bit Feed, a 1-1/4"-7 Spindle and a 2-1/2" x 2-1/2" adjustable Rack and Pinion Column. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,888.58
|
|
MANTA IV CORE DRILL RIG
The MANTA IV CORE DRILL RIG is designed for wet-cutting of Concrete, Stone and Masonry. The MANTA IV comes with a 4HP, 2000W-18Amp, 110V AC 60Hz, 700RPM Motor. The maximum diameter coring bit capacity is 6". The Drilling stroke is 19". The MANTA IV has a 1-1/4" Tool Fitting. FREE Shipping via LTL Truck. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,067.80
|
|
MILWAUKEE 1HP CORE DRILL MOTORS FOR MANTA CORE DRILL RIGS
The MILWAUKEE 1HP CORE DRILL MOTORS FOR MANTA CORE DRILL RIGS have a 1-1/4"-11 Spindle. They work with the MANTA I, II and III Core Drilling Rigs. FREE Shipping via FedEx. Click on Photo to see a larger view.
PRICE: $1,229.85
|
|
Coring Products
|
Hand-Held Drills
|
|
MK PORTABLE DRILL STAND FOR HAND-HELD CORE DRILLS
The MK PORTABLE DRILL STAND FOR HAND-HELD CORE DRILLS, Part#159253, is designed to use with the MK-2000P and MK-130/3 Hand-Held Core Drills. The Drill Capacity is 6" Diameter. It has a combination anchor/vacuum base and a adjustable column for angle drilling. NOTE: a 53mm reducer ring (Part#164995-not included with stand) is required to mount the MK-2000P to stand. FREE Shipping via FedEx. Click on the Photo to see a larger view.
PRICE: $898.88
|
|
MK-130/3 HAND-HELD WET-CUTTING CORE DRILL
The MK-130/3 HAND-HELD CORE DRILL, Part#158368, is a wet-cutting core drill designed to create accurate openings up to 3" (hand-held) or 6" (rig-mounted) in Brick, Limestone, Cinder Blocks and other Abrasive Materials. It has three gear speeds, 600, 1300 and 2800RPM. The Motor draws 16 Amps at 110Volts. The connecting thread sizes included are 1-1/4"-7, 5/8"-11 and G1/2". FREE Shipping via FedEx. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $1,188.88
|
|
MK-1300 HAND-HELD DRY-CUTTING CORE DRILL
The MK-1300 HAND-HELD DRY-CUTTING CORE DRILL, Part#158366, is a dry-cutting core drill designed to create accurate openings up to 3-1/4" in Brick, Limestone, Cinder Blocks and other Abrasive Materials. It has one load speed ranging from 0-2000RPM. The Motor draws 15 Amps, 1300 Watts at 110Volts. The Collet size is 5/8"-11. FREE Shipping via FedEx. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $588.88
|
|
MK-2000 HAND-HELD DRY-CUTTING CORE DRILL
The MK-2000 HAND-HELD CORE DRILL, Part#158367, is a powerful dry-cutting diamond core drill designed for shock-free drilling to create accurate openings up to 5-1/4" in Brick and other Abrasive Materials. It has two gear speeds, 0-1000RPM and 0-2000RPM. The Motor draws 15 Amps, 1700 Watts, at 110Volts. The collet is 5/8"-11. FREE Shipping via FedEx. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $748.88
|
|
MK-2000P HAND-HELD WET-CUTTING CORE DRILL
The MK-2000P HAND-HELD CORE DRILL, Part#158365, is a powerful shock-free wet-cutting diamond core drill designed to be used Hand-Held or Rig-Mounted. It is designed for drilling holes up to 4" in Reinforced Concrete, Brick, Block and Stone. The drilling capacity is 1-1/2" Hand-Held and 4" Rig-Mounted. It has two gear speeds, 0-800RPM and 0-1570RPM. The Motor draws 15 Amps at 110Volts. The connecting thread sizes included are 1-1/4"-7 and 5/8"-11. FREE Shipping via FedEx. Click on Photo to see the FEATURES and Included ACCESSORIES.
PRICE: $988.88
|
|
Coring Products
|
Diamond Core Bits
|
|
BD-305CB PREMIUM TILE & MARBLE DIAMOND HOLE SAWS
The BD-305CB PREMIUM TILE & MARBLE DIAMOND HOLE SAWS-WET/DRY are designed to cut clean, smooth holes through soft Ceramic Tile and Marble Tile. They can be used wet or dry and have a 3/8" shank. FREE shipping via FedEx Economy 2nd Day per "FREE SHIPPING SPECIAL." Click on the Photo to see the available diameter hole sizes.
PRICE: $49.88
|
|
MK LAPIDARY CORE BITS PREMIUM WET-CUTTING 1-1/4" DEEP HOLES
The MK LAPIDARY CORE BITS PREMIUM WET-CUTTING 1-1/4" DEEP HOLES all have a 5/8"-11 nut with a cutting surface of .250 in Depth. They are designed to drill up to 1-1/4" in Depth. FREE shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL." Click on the Photo to see the available diameter hole sizes.
PRICE: $89.88
|
|
MK LAPIDARY CORE BITS PREMIUM WET-CUTTING 1-3/4" DEEP HOLES
The MK LAPIDARY CORE BITS PREMIUM WET-CUTTING 1-3/4" DEEP HOLES all have a 3/4"-16 nut with a cutting surface of .250 in Depth. They are designed to drill up to 1-3/4" in Depth. FREE shipping via FedEx 2nd Day per "FREE SHIPPING SPECIAL." Click on the Photo to see the available diameter hole sizes.
PRICE: $89.88
|
|
MK RAPID CORE DRILLING KIT
The MK RAPID CORE DRILLING KIT, item#166158, offers the contractor an easy and cost effective system to dri |
